Guide · 2026-10-31 · 8 min

Print a PDF at actual size on a Mac without shrinking

Before you send a 30-page sewing pattern or woodworking drill template to the printer, print the single page that carries the calibration square. In macOS Preview, open File → Print (⌘P), select Scale in the Preview section, and type 100%. Match the paper size to both the downloaded file and the sheets in your tray, then measure the printed square horizontally and vertically with a hard ruler. A page that looks right in the print preview can still come off the rollers 4% to 6% smaller than the pattern requires.

Actual-size PDF printing outputs a page at the exact physical dimensions recorded inside the PDF file (1:1 scale) without shrinking or expanding the artwork to fit the printer’s margins. Output accuracy still depends on loading the matching paper size (US Letter vs. A4), turning off secondary fit-to-page switches in the print dialog, and starting from an unscaled source PDF. If a file was already shrunk during an earlier layout export or browser save, printing that copy at 100% simply reproduces the smaller version.

Lock Preview’s print dialog to 100% and check Paper Handling

Mac users coming from Adobe Acrobat often look for a radio button labeled “Actual Size” in the system print sheet. macOS Preview names that control Scale: 100%, and it sits next to two separate fit settings that can override your measurement if left enabled.

Open the downloaded original PDF in Preview (not inside a web browser tab) and press ⌘P:

  1. Select your physical printer and verify that Paper Size matches the paper in the tray (US Letter at 8.5 × 11 in, or A4 at 210 × 297 mm).
  2. In the Preview section of the dialog, select Scale and enter 100%. Leave Scale to Fit unselected.
  3. Expand Layout and confirm Pages per Sheet is set to 1.
  4. Expand Paper Handling and check Scale to Fit Paper Size. If that toggle is turned on, turn it off; otherwise the print system will rescale the page to the target paper even when Preview is set to 100%.
  5. Set the page range to the single calibration-square page, print it, and measure before running the rest of the packet.

Apple’s Preview printing guide documents the manual percentage field separately from Scale to Fit. When Scale to Fit is active, Print Entire Image shrinks the page inside the printer’s margins, while Fill Entire Paper enlarges and crops it to the sheet’s aspect ratio. The secondary Paper Handling controls are covered in Apple’s Mac print options guide.

Measure the test square first and check which file you opened

Check the label printed beside the test square before grabbing a ruler. Indie pattern makers often include both a 4 × 4 in (101.6 mm) box and a 100 × 100 mm (3.94 in) box, or supply separate downloads for US Letter, A4, and A0 Copyshop. Measuring a 100 mm square against a 4-inch mark on your ruler looks like a 1.6 mm printer error when the print is actually spot on.

Closet Core Patterns’ printing guide notes that off-scale test squares and mismatched Letter/A4 files are among the most common issues sewists hit before taping pages together. If a line labeled 100 mm measures 95 mm on paper, the page came out at 95% of its intended size:

Printed scale = (Measured length ÷ Stated length) × 100
(95 mm ÷ 100 mm) × 100 = 95%

Resist the urge to type 105% into the Scale box to compensate. Compensating percentages usually throw off the outer tile assembly lines. Instead, check whether you printed an A4 file onto shorter US Letter paper (279.4 mm tall vs. 297 mm), printed from a browser’s built-in PDF viewer (which applies its own fit-to-page margin), or left Scale to Fit Paper Size checked under Paper Handling. Change one variable at a time and print the test square again.

Four places that say “100%” and why clipped edges happen

Seeing 100% somewhere on screen does not guarantee a 1:1 physical print. Four different controls use the same number for different jobs:

Where you see 100%What it actually controlsDoes it give 1:1 physical scale on paper?
Preview’s window toolbar zoomHow large the page appears on your monitor while readingNo. Screen zoom never changes printer output.
Preview Settings → “Define 100% scale as”Whether 100% on-screen zoom matches physical size or 1 point per screen pixelNo. Apple’s display-size guide notes this only affects the display.
Preview Print dialog (⌘P) → Scale: 100%The output scale Preview sends to the print jobYes, as the baseline, provided Paper Handling scaling is off and the source PDF is unscaled.
A sheet-layout app’s item scale (such as HerdPrint)Scale relative to the layout slot and safe margin on the sheetNo. The page was already fitted inside the slot’s margins first.

When your test square measures 100 mm (or 4 inches) in both directions but the outer border or corner alignment triangles are missing, the scale is right and you are hitting the printer’s unprintable hardware margin (typically 3 to 5 mm around the sheet). Adobe’s Actual Size documentation states the same rule: at 100% scale, any artwork that extends beyond the paper or printable area is clipped.

Do not switch your inkjet driver to Borderless paper just to recover clipped corner marks. Borderless printing works by overspraying past the edge of the sheet, which silently expands the entire page by roughly 2% to 4% and ruins the pattern’s measurements. If the inner seam or trim lines are still visible, align the tiles using those inner lines; otherwise, switch to the designer’s matching paper file (US Letter vs. A4).

Why a layout export printed at 100% still comes out smaller

HerdPrint arranges batches of PDFs and images onto A4 or US Letter sheets. Users sometimes import a template into HerdPrint, choose one document per sheet, set the inspector’s Scale slider to 100%, export a layout PDF, and wonder why printing that PDF at 100% in Preview still shrinks the template.

The reason is how sheet composition works: HerdPrint reserves a conservative 8 mm app safe margin around the sheet, fits each document inside the resulting slot (baseScale), and then applies the global scale (95% by default) and the individual item’s Scale slider on top of that fit. Inside HerdPrint, 100% means “100% of the safe-margin slot,” not 100% of the source PDF’s native dimensions. Once you export that composed sheet via Export Layout PDF…, the smaller geometry is baked into the new PDF.

Keep the two workflows separate:

  • For templates where a 1 mm error ruins the piece (sewing patterns, leatherwork templates, guitar fret scales, rotary drill guides), open the original PDF directly in macOS Preview and print at Scale: 100%.
  • For reading and filing batches (expense receipts, invoices, contracts, worksheet packets), drop the batch into HerdPrint to combine 1-up, 2-up stacked, or 2-up side-by-side sheets, or press ⇧⌘M (Print on Its Own Sheet) for dense pages. See the Mac batch PDF printing guide and two-up receipt printing guide for how slot geometry affects text size.

If someone else is printing the pattern for you, send them this checklist along with the original file:

Open the original file [filename.pdf] in macOS Preview (do not print from a browser tab).
Paper Size: [US Letter / A4] (standard margins, NOT Borderless)
Preview section -> Scale: 100% (leave Scale to Fit unchecked)
Layout -> Pages per Sheet: 1
Paper Handling -> Scale to Fit Paper Size: Off
Print page [X] first and verify the test square measures [4 in / 100 mm] before printing the rest.

Common questions

Where is the “Actual Size” button in the Mac Preview print dialog?

macOS Preview does not use Adobe Acrobat’s “Actual Size” label. In Preview’s print dialog (⌘P), select the Scale radio button in the Preview section and type 100%. Then open Paper Handling and make sure Scale to Fit Paper Size is turned off.

Why are the edges or assembly lines cut off when I print at 100% on Mac?

Most home laser and inkjet printers have a 3 to 6 mm physical grip margin around the sheet where the printhead cannot lay down ink. Because 100% scale refuses to shrink the page, any border drawn closer to the edge than that hardware limit gets clipped. First verify you did not print an A4 file on shorter US Letter paper (or a wider US Letter file on narrower A4 paper). If the test square measures accurately and the inner trim lines are intact, you can still assemble the pattern.

Does “Borderless” printing fix cut-off pattern edges at 100% scale?

No. Printer drivers implement borderless printing by enlarging the page image by 2% to 4% so the ink oversprays past the paper edges. While your corner marks will appear, a 4-inch calibration square will measure roughly 4.1 inches, throwing off every garment piece across the pattern. Always use standard (non-borderless) paper settings for templates that depend on exact measurements.

HerdPrint app icon

More notes